Weider Total Body Works 5000 Bench Uk Manual - Page 14
Part Identification Chart
View all Weider Total Body Works 5000 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
PART IDENTIFICATION CHART Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached. M10 x 175mm Bolt (42) M6 Washer (39) M8 Washer (54, 55) M8 Nylon Locknut (36, 46) M6 x 16mm Screw (60) M10 x 20mm Screw (9) M6 x 38mm Screw (51) M8 x 52mm Bolt (40) M10 Nylon Locknut (45) M10 x 80mm Bolt (43)
M6 Washer (39)
M8 Washer (54, 55)
M8 Nylon Locknut (36, 46)
M10 Nylon Locknut (45)
M10 x 175mm Bolt (42)
M8 x 52mm Bolt (40)
M10 x 20mm Screw (9)
M10 x 80mm Bolt (43)
M6 x 38mm Screw (51)
M6 x 16mm Screw (60)
PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST in the center of this manual.
Note: Some small parts
may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.