Weider Total Body Works 5000 Bench Uk Manual - Page 7
with an M8 Bright Zinc Washer 55 and an M8
View all Weider Total Body Works 5000 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
5. Attach the Stabiliser (6) to the Adjustment Leg (5) 5 with three M8 x 52mm Bolts (40), three M8 Black Zinc Washers (54), and three M8 Black Zinc Nylon Locknuts (46). Make sure that the head of the Bolt is in the hexagonal hole in the Stabilizer. 6. Attach an 108mm Eyebolt (31) to the Top Frame (1) 6 with an M8 Bright Zinc Washer (55) and an M8 Bright Zinc Nylon Locknut (36). Do not overtighten the Locknut; the Eyebolt must be able to pivot easily. Repeat this step on the other side of the Top Frame (1). 46 54 54 5 6 40 40 31 1 31 55 36 7. Slide a Foam Pad (16) onto each side of the Handlebar (29). 8. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENTS, beginning on the next page. 7 16 29 16 7