Weslo Cadence 4250 English Manual - Page 7
Operation, Adjustment, Danger
View all Weslo Cadence 4250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
OPERATION AND ADJUSTMENT GROUNDING INSTRUCTIONS This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electrjc current to reduce the risk of electric shock. This product is equipped with a cord having an equipmeni-g-foUnding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. ' ' DANGER: Improper cOlinliCtion of the equipMent-gr(unding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product - if it will not fit the outlet, have_a proper outlet installed by a qualified electrician. This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in Drawing 1. A temporary adapter that looks like the adapter illustrated in Drawing 2 may be used to connect this plug to a 2-pole receptacle as shown in Drawing 2 if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet (Drawing 1) can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used it must be held in-place by a metal screw. Some 2-pole receptacle outlet box covers are not grounded: Contact a'qualified electrician to determine if the outlet box cover is grounded before using an adapter - - - Grounded Outlet Box 2 Grounded Outlet Box 0•° . Groun• ;d:in. g Plug Adapter Grounding Plug • Grounding Pin Grounded Outlet • Lug t)to Metal Screw Grounding Pin SILICONE APPLICATION To maintain the low-friction quality of the treadmill belt and reduce treadmill wear, a non-oil, non-petroleum base silicone lubricant should be applied generously to the walking platform. (Silicone lubricant is available at most hardware and automotive stores.) It is very important to apply silicone lubricant before initial use of the treadmill. Lubricant should also be applied after every 10 hours of use or whenemer a decrease in performance.is noticed. Unplug the power cord, lift each side of the treadmill belt and apply the lubricant generously to the area indicated.