Weslo Pursuit R 3.8 Bike English Manual - Page 10

8. Loosen and remove the Seat Post Knob (9) from the Frame (1). 8 Insert the Seat Post (5) into the Frame (1). Adjust the Seat Post to the desired height and insert the Seat Post Knob (9) through the indicated hole in the Frame into one of the adjustment holes in the Seat Post. Tighten the Seat Post Knob (9). Make sure that the Seat Post Knob is firmly engaged in one of the adjustment holes in the Seat Post (5). Adjustment Holes 1 5 Hole 9 9. Identify the Left Pedal (24), which is marked with an "L." 9 Using an adjustable wrench, firmly tighten the Left Pedal (24) counterclockwise into the left arm of the Crank (21). 21 Tighten the Right Pedal (not shown) clockwise into the right arm of the Crank (not shown). IMPORTANT: Tighten both pedals as firmly as possible. After using the exercise cycle for one week, retighten the pedals. For best performance, keep the pedals tightened. Strap 24 Tab Adjust the strap on the Left Pedal (24) to the desired position, and press the end of the strap onto the tab on the side of the Left Pedal. Adjust the strap on the Right Pedal (not shown) in the same way. 10. Make sure that all parts are properly tightened before you use the exercise cycle. Note: After assembly is completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor. 10