Western Digital My Passport Pro User Manual - Page 7

MY PASSPORT PRO USER MANUAL Power/Activity LED The power/activity LED shows the device power state as follows: LED Appearance Power State/Activity On steady Idle Fast flashing, approximately 3 times per second Slow flashing, approximately every 2.5 seconds Activity System standby Integrated Thunderbolt Cable As shown in Figure 2 on page 3, the My Passport Pro portable RAID storage device has an integrated single-channel Thunderbolt cable that provides a fast, flexible, highperformance interface for unprecedented data transfer rates. Thunderbolt technology supports data transfer rates up to 10 Gb/s. Note: Your My Passport Pro portable RAID storage device must be connected to a Mac computer that supports Thunderbolt technology. Registering Your Device Always register your My Passport Pro portable RAID storage device to get the latest updates and special offers. You can easily register your device using the WD Drive Utilities software, as described in "Registering the Device" on page 18. Another way is to register online at http://register.wd.com. Handling Precautions WD products are precision instruments and must be handled with care during unpacking and installation. Rough handling, shock, or vibration can damage drives. Always observe the following precautions when unpacking and installing your external storage product: Do not drop or jolt the device. Do not move the device during activity. Do not place the device on carpeting. Make sure the device is on a clean, firm, and stable surface. To allow proper ventilation, do not block any of the enclosure's air slots. ABOUT YOUR WD STORAGE DEVICE - 4