Whirlpool DU1055XTVB Installation Instructions - Page 17

Electrical Shock Hazard Electrically ground dishwasher. Connect ground wire to green ground connector in terminal box. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 2 Direct Wire-Connect ground wire Wiring configuration Power supply wire: white black ground wire Terminal box wire: white black ground connector If needed, see website for animated representation of this step. Visit www.whirlpool.com/electrical under FAQ tab. 4 Direct Wire-Secure cable in conduit connector Ground wire Ground wire Washer Ground connector Form bare ground wire into a U-shaped hook. Wrap ground wire hook clockwise around ground connector screw and under the washer. Securely tighten ground connector. 3 Direct Wire-Connect remaining wires Tighten strain relief screws to secure cable. 5 Direct Wire-Reinstall terminal box cover Place wires inside terminal box. Insert tabs on left side of cover. Make sure wires are tucked inside box. Close cover ensuring wires are not pinched. Use ¹⁄₄" nut driver and previously removed screw to secure cover. NOTE: Do not pre-twist stranded wire. Twist on UL Listed/CSA Approved wire connector. Gently tug on wires to be sure both are secured. Connect wires black to black and white to white, using UL Listed/CSA Approved twist-on wire connectors (not included). 17