Whirlpool DU1055XTVB Installation Instructions - Page 19

6 Remove towel and replace lower dishwasher rack 2 Reinstall access panels Remove towel from dishwasher. Reinstall the lower dish rack. If needed, see website for animated representation of this step. Visit www.whirlpool.com/anchoring under FAQ tab. Complete Installation 1 Reinstall access panels Insulation (on some models) Hold the two panels together and place them against dishwasher leg. Using a Phillips or ¹⁄₄" screwdriver, reinstall the screws through the holes in the access panel and the slots in the lower panel. 3 Check lower panel edge Access panel Lower panel Insulation Grounding clip Check that grounding clip is attached to the lower panel. Position the lower panel behind the access panel. On some models there is insulation on the access panel which must fall behind the insulation on the lower panel. Check that the lower edge of the lower panel contacts the floor. Adjust if necessary. 4 Tighten screws Tighten access panel screws. 19