Whirlpool GCEM2990TQ Installation Instructions - Page 6

!!!!iL;i_i:i:Mi,i_:t:;ii_!di:ii!!_i:FstiM:!_f,i,:,i(__ii!tiiii!lii_}ii_:t7ii_'i_i_! Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong, Do not use an adapter, Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock, IMPORTANT: The dryer must be electrically grounded in accordance with Iocal codes and ordinances or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, latest edition. if codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that the ground path is adequate. A copy of the above code standards can be obtained from: National Fire Protection Association One Batterymarch Park, Quincy, MA 02269 [] A 120-volt, 60-Hz, AC-only, 15- or 20-amp, fused electrical circuit is required. A time-delay fuse or circuit breaker is also recommended, it is recommended that a separate circuit serving only this dryer be provided. Recommended Ground Method The dryer, when installed, must be electrically grounded in accordance with Iocal codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, latest edition, and all local codes and ordinances. GROUNDING INSTRUCTIONS For a grounded, cord-connected dryer: This dryer must be grounded, in the event of a malfunction or breakdown, grounding will reduce the risk of eIectdc shock by providing a path of Ieast resistance for electric current. This dryer is equipped with a cord having an equipmentgrounding conductor and a grounding plug. The pIug must be pIugged into an appropriate outlet that is properly installed and grounded in accordance with aII local codes and ordinances. WARNING: improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified eIectrician or service representative or personnel if you are in doubt as to whether the dryer is properly grounded. Do not modify the plug provided with the dryer: if it wiii not fit the outlet, have a proper outlet installed by a qualified electrician. SAVE THESE INSTRUCTIONS 6 iMPORTANT: The dryer must be electrically grounded in accordance with local codes and ordinances or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, latest edition. The National Electric Code requires a 4-wire supply connection for homes built after 1996, dryer circuits involved in remodeling after 1996, and all mobile home installations. if codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that the ground path is adequate. A copy of the above code standards can be obtained from: National Fire Protection Association One Batterymarch Park, Quincy, MA 02269 [] A four-wire or three-wire, single-phase, 120/240-volt, 60-Hz, AC-only electrical supply (or four-wire or three-wire, 120/208-volt, if specified on the model/seria! rating plate) is required on a separate, 30-amp circuit, fused on both sides of the line. A time-delay fuse or circuit breaker is recommended. Recommended Ground Method It is your responsibility to contact a qualified electrical installer to ensure that the electrical installation is adequate and in conformance with the National Electrical Code, ANSI/NFPA 70, latest edition, and all local codes and ordinances. GROUNDING INSTRUCTIONS For a grounded, cord-connected dryer: This dryer must be grounded, in the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of Ieast resistance for electric current. This dryer uses a cord having an equipment-grounding conductor and a grounding pIug. The plug must be pIugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. _' For a permanently connected dryer: This dryer must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be ran with the circuit conductors and connected to the equipment-grounding terminal or lead on the dryer. WARNING: improper connection of the equipment- grounding conductor can result in a risk of eIectric shock. Check with a qualified eIectrician or service representative or personnel if you are in doubt as to whether the dryer is propedy grounded. Do not modify the plug on the power suppIy cord: if it wiII not fit the outlet, have a proper outlet installed by a quaIified electrician. SAVE THESE INSTRUCTIONS