Whirlpool LRF4001RY Use and Care Manual - Page 8

2. Place garment(s) on hanger(s). Button shirts and jackets. Smooth surfaces. 3. Slide hanger onto front of hanger bar at top of Fabric Freshener. Position hanger in 1 of 2 slots. NOTES: s The Fabric Freshener works best with no more than 2 clothing items per cycle. s Fabric Freshener will not operate if items are placed on the bottom (exhaust grille) of Fabric Freshener. s Slide hanger bar through hole in top of pants hanger. Cooling A Cooling indicator light indicates that the drying cycle is complete and air is circulating to cool the garment(s). Complete A Complete indicator light indicates that the cycle is complete. Unzip bag and remove items from Fabric Freshener. NOTE: Metal hangers, buttons and zippers may be very warm. Starting/Stopping Start Fabric Freshener WARNING If using Cotton Performance Pack tensioning weights, add weights to lower edges of garments. See "Accessories" for information on ordering additional accessories. NOTE: Do not use tensioning weights on garments that may stretch easily. Explosion Hazard Use water only. Failure to do so can result in death or explosion. NOTE: For drying cycle only, leave cycle cup empty and press the ON/OFF button for approximately 1 second. 1. Remove cycle cup from cup receptacle. Fill cycle cup with appropriate level of room temperature, distilled water according to material being refreshed and the markings on the side of the cycle cup. See Fabric Recommendations chart. IMPORTANT: Use distilled water only in cycle cup. Failure to use distilled water may result in permanent damage to the machine. Control Panel Indicator Lights Start/Steaming A Start/Steaming indicator light indicates Fabric Freshener cycle has started and is in the steaming process. Gentle Drying A Gentle Drying indicator light indicates steaming cycle is complete and the drying cycle has started. A B A. Cycle cup for distilled water only B. Cup receptacle 8