Whirlpool WDF518SAHW Installation Instructions - Page 10
DIRECT WIRE ROUTING, Direct Wire-route cable, PREPARE DISHWASHER, Put the dishwasher on its back
View all Whirlpool WDF518SAHW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
DIRECT WIRE ROUTING 6. Direct Wire-route cable PREPARE DISHWASHER WARNING Direct wire location 4" If direct wire, route the cable 4" (10.2 cm) from the right side of the cabinet to align with channel in the bottom of the dishwasher. Tape cable to the floor in the area shown. This will help secure the cable in place when the dishwasher is moved into the cabinet opening during direct wire connection. Tip Over Hazard Do not use dishwasher until completely installed. Do not push down on open door. Doing so can result in serious injury or cuts. WARNING Excessive Weight Hazard Use two or more people to move and install dishwasher. Failure to do so can result in back or other injury. 7. Put the dishwasher on its back Dishwasher bottom Helpful Tip: Place cardboard under dishwasher until installed in cabinet opening to avoid damaging floor covering. Using two or more people, grasp sides of dishwasher door frame, and place the dishwasher on its back. Do not use the door panel as a worktable without first covering it with a towel to avoid scratching the door panel. 10