Whirlpool WDF518SAHW Installation Instructions - Page 15
Break tab off, Insert bracket into slot, Secure sidemount with screw, Slide completely into cut out
View all Whirlpool WDF518SAHW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
29. Break tab off 32. Slide completely into cut out Break tab off at score line for side mounting. 30. Insert bracket into slot With top or side mount anchers attached, slide unit into cut out until flush with cabinets. 33. Level front to back side to side Insert brackets into slot on either side of tub collar. 31. Secure sidemount with screw Secure brackets into slot with proviced screws. Using a level, adjust legs If needed. Use a level to check if the dishwasher is level front to back. If the dishwasher is not level front to back, adjust the height of the rear leg until the dishwasher is level. Open the door of the dishwasher and check that both the tub and door clearances are correct. If not, rotate the leveling legs on the bottom front of the dishwasher. You can also check this by placing a level against an inside front vertical surface of the tub. 34. Leveling Leg adjustment Turn leg counter clockwise to raise the dishwasher or clockwise to lower the diswasher. 15