Whirlpool WDT710PAYM Installation Guide - Page 16

Move Dishwasher Close to Cabinet, Opening - console

Page 16 highlights

Option 2, Side Attachment - Stainless Steel Tub Models For marble, granite, or other hard surface countertops Remove the brackets from the parts package. Move Dishwasher Close to Cabinet Opening WARNING Excessive Weight Hazard Use two or more people to move and install dishwasher. Failure to do so can result in back or other injury. NOTE: Do not install kick plate until instructed to do so. Break off the end of the bracket along the scored line. Push the plastic buttons out of the side of the tub. NOTE: Save the buttons to cover the holes after dishwasher is installed. IMPORTANT: Double-check correct placement of utilities. Grasp the sides of the dishwasher at the edges of the door panel. Tilt dishwasher backward on wheels and move dishwasher close to cabinet opening. NOTE: Do not push on the front of the panel or on the console. Panel or console may dent. Helpful Tip: Temporarily tape utilities to the floor in the locations shown to prohibit them from moving when dishwasher is moved into the cabinet opening. Push bracket into slot on the side of dishwasher and bend tab in toward the side of the dishwasher so that it keeps the bracket in place. NOTE: Do not attach the dishwasher. This will be done later. Option 3, Side Attachment - Plastic Tub Models For marble, granite, or other hard surface countertops Order Mounting Bracket Kit Part Number 8212560. Check that water line is on the left side of opening and drain hose is near the center of the cabinet opening. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

16
Option 2, Side Attachment - Stainless Steel Tub Models
For marble, granite, or other hard surface countertops
Remove the brackets from the parts package.
Break off the end of the bracket along the scored line.
Push the plastic buttons out of the side of the tub.
NOTE:
Save the buttons to cover the holes after dishwasher is
installed.
Push bracket into slot on the side of dishwasher and bend tab in
toward the side of the dishwasher so that it keeps the bracket in
place.
NOTE:
Do not attach the dishwasher. This will be done later.
Option 3, Side Attachment - Plastic Tub Models
For marble, granite, or other hard surface countertops
Order Mounting Bracket Kit Part Number 8212560.
Move Dishwasher Close to Cabinet
Opening
NOTE:
Do not install kick plate until instructed to do so.
IMPORTANT:
Double-check correct placement of utilities. Grasp
the sides of the dishwasher at the edges of the door panel. Tilt
dishwasher backward on wheels and move dishwasher close to
cabinet opening.
NOTE:
Do not push on the front of the panel or on the console.
Panel or console may dent.
Helpful Tip:
Temporarily tape utilities to the floor in the locations
shown to prohibit them from moving when dishwasher is moved
into the cabinet opening.
Check that water line is on the left side of opening and drain hose
is near the center of the cabinet opening.
WARNING
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.