Xerox 097N01674 Quick Use Guide - Page 21

Installing Option Kits English This section provides instructions on how to install and configure optional features: • Network Accounting • Server Fax NOTE: For more instructions on installing and configuring Server Fax and Network Accounting, refer to the System Administration CD. Installing Option Kits All the Option Kits are installed in the same way. Each kit will contain a Feature Enablement Key and instructions. 1 With the machine switched on, insert the Feature Enablement Key into the Card Reader slot at the right hand side of the machine. Indicator Card Reader slot lights on the Feature Enablement Key will highlight (first red, blinking green and then solid green). 2 When the feature is successfully installed a pop-up message will tell you that the feature is configured and ask you to remove the Feature Enablement Key. Network Accounting Network accounting provides the ability to manage usage of the machine with detailed cost analysis capabilities. Print, Scan, Fax and Copy jobs are tracked at the machine and stored in job log. Users must enter their User ID and Account ID to access the machine and information about the numbers of jobs performed is recorded in a job log. Installing the kit Install the kit. Refer to Installing Option Kits on page 17. Enable Network Accounting 1 Press the Log In/Out button. 2 Enter 1111 and select Enter. 3 Press the Machine Status button then select Tools > Accounting > Accounting Enablement > Authentication Mode. 4 Select the Enable button under Network Accounting header. 5 Select Save. 6 Press the Log In/Out button and select Confirm to logout. quick use guide 17