Xerox 4500N Reference Guide - Page 21
Accessing Power Saver, Preventing Access to Front Panel Settings, Printing the Startup
View all Xerox 4500N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Printer Settings Printing the Startup Page To print the "Startup Page": 1. Select Information, then press the OK button. 2. Select Information Pages, then press the OK button. 3. Select Startup Page, then press the OK button to print. Accessing Power Saver To save energy, the printer enters a Power Saver, low-energy consumption mode after a predefined period of time since its last activity. In this mode, most printer electrical systems are shut down. When a print job is sent to the printer, the printer enters Warmup Mode. You can also warm up the printer by pressing the OK button on the front panel. If you find that the printer is going into Power Saver mode too often and you do not want to wait while the printer warms up, increase the length of time before the printer goes into Power Saver mode. Change the timeout value as follows: 1. At the printer's front panel, select Printer Setup, then press the OK button. 2. Select Printer Controls, then press the OK button. 3. Select Power Saver Timeout, then press the OK button. 4. Press the Down Arrow or Up Arrow button to scroll to a selected Power Saver timeout value. Select a larger value if you want to extend the length of time before the printer goes into Power Saver mode. 5. Press the OK button. Preventing Access to Front Panel Settings To prevent access to front panel settings, you can lock the front panel settings from CentreWare IS. A lock icon appears next to items in the front panel that cannot be accessed by users. Using CentereWare IS To set front panel menu preferences: 1. Launch your web browser. 2. Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx). 3. Select Properties. 4. Select the General folder on the left sidebar. 5. Select Printer Defaults. 6. Select On or Off from the Front Panel Menu drop-down list. ■ Select On to have all menus available. ■ Select Off to limit the printer setup items. Phaser™ 4500 Laser Printer 1-14