Xerox 6180N Common Controller System Guide v 3.7 - Page 13
Gateway Configuration, Internet Services (HTTP) Gateway Configuration
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
2. Gateway Configuration Setting up the HTTP and SNMP gateways cannot be accomplished through the graphical user interface and must be set using the gwConfig utility through a UNIX Terminal window. The IPP gateway is configured using the DocuSP interface. Internet Services (HTTP) Gateway Configuration Perform the following to configure the HTTP gateway: 1. Start the configuration utility. Type ./ gwConfig. NOTE: Refer to the instructions in the section, IPP Gateway Configuration for information about starting the configuration. 2. Perform the following to set up the Internet Services (HTTP) Gateway: Enter the name of the gateway to be configured: Internet Services Configure the Internet Services Gateway? [Y/N] y Enter name: Value data Printer URL: http://..com NOTE: Use the IP address of the controller if there is no domain name. For example, http://52.126.255.255.com 3. A confirmation message of the entered value displays. Confirm that the entry is correct and enter y for yes. 4. Continue with this process for every value to be configured. 5. When all of the desired values have been configured, press at the Enter Name: [Value Data line]. 6. When asked to accept the values and update the configuration, enter y for yes. 7. The configuration utility exits. Common Controller 2-1