Xerox 6180N Common Controller System Guide v 3.7 - Page 50
Socket Gateway Configuration Utility: setVPSoption, This sets Port 1 as VPS and Port 2 as NONVPS
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Printing System Guide Socket Gateway Configuration Utility: setVPSoption On the DocuSP gui, gateways can be configured using the Setup pull down menu. Selecting [Gateways] from the Setup menu opens a window with the various gateway tabs available. The following describes how to configure the gateways without using the DocuSP. This utility allows you to configure the two ports of the Socket Gateway to either remove the echo commands (VPS) or leave the data unaltered (NONVPS). If you are a DT61xx or DT65/75/90 non-LCDS customer, configure both ports as NONVPS. DP1xxxEPS and DT 75/90 customers using LCDS need to decide whether to configure one or both ports as VPS. If a port is not being used, it is recommended to set the port to NONVPS. The Socket Gateway allows two ports to be configured at one time. Regardless of the port number assigned on the Socket Configuration Utility, the socket port configured on the first port will always be Port 1, and the second line is always Port 2. Both ports will are set as VPS upon installation. Syntax of the utility: setVPSoption -1 -2 0 - Specifies Port 1 1 - Specifies Port 2 option -VPS(default) or NONVPS An example of the utility is as follows: docusp_printer% su root Password: # cd /opt/XRXnps/bin # ./setVPSoption -1VPS -2NONVPS This sets Port 1 as VPS and Port 2 as NONVPS) # ./setVPSoption -1VPS This sets Port1 as VPS and leaves Port 2 unaltered. # ./setVPSoption -2NONVPS This leaves Port 1 unaltered and sets Port 2 as NONVPS. Restart the DocuSP software after setting this option. 5-6 Common Controller