Xerox 6180N DocuSP 61xx version 3.6 - Operator Guide - Page 136
Limitations, Table 7-17. Common US paper sizes
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Technical information With the introduction of other DFA-complaint finishing devices for use with the DocuTech 61xx family of printers, additional paper stock sizes can be handled by the finishing devices, both straight from the Bypass Transport or rotated. Limitations Do not rotate paper sizes that will not fit through the DocuTech 61xx Bypass Transport to a third party finishing device. Before creating a document to be rotated by the Bypass Transport, set the paper stock size required to fit within the limitations detailed in the following tables and as follows: • The diagonal dimension of the paper stock must be equal to or less than 18 inches (457 mm). • The paper stock must be within the paper stock size parameters of the DocuTech 61xx printer paper trays. Refer to the DocuSP controller on-line help system for information on setting finisher devices and finisher profiles to enable rotation to a third party finisher. Table 7-17. Common US paper sizes Common size Inches x name inches Millimeter equivalent Diagonal in inches Can be rotated Comment (similar to or the same as) 8.0 x 10.75 203 x 273 13.40 YES US Letter/ US 8.5 x 11.0 A-size 216 x 279 13.90 YES 2-up of US 5.5 x 8.5 in. (statement) 9.0 x 12.0 229 x 305 15.00 YES 2-up of US 6.0 x 9.0 in. (common "book" size) US Legal 8.5 x 14.0 216 x 356 16.38 YES ISO Foolscap 9.0 x 14.0 229 x 356 16.64 YES 2-up of US 7.0 x 9.0 in. 9.0 x 15.0 229 x 381 17.49 NO* 2-up of US 7.5 x 9.0 in. 10.5 x 14.5 267 x 368 17.90 NO* 2-up of US 7.25 X 10.5 in. (Executive) US Ledger/ 11.0 x 17.0 279 x 432 20.25 NO US B-Size 2-up of US 8.5 x 11.0 in. (Letter) 7-20 DocuTech 61xx Operator Guide