Xerox 6400S WorkCentre 6400 User Guide - Page 178
Printing Takes Too Long, Product Resets or Turns Off Frequently, Probable Causes, Solutions - service mode
UPC - 095205743579
View all Xerox 6400S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Troubleshooting Printing Takes Too Long Probable Causes The printer is set to a slower printing mode (for example, heavyweight stock or transparency). The printer is in ENERGY SAVE mode. The job is very complex. Solutions It takes more time to print with special media. Make sure that the media type is set properly in the driver and at the printer's control panel. It takes time for printing to start in power saving mode. Wait. No action needed. Product Resets or Turns Off Frequently Probable Causes The power cord is not correctly plugged into the outlet. A system error occurred. Solutions Turn off the printer, confirm that the power cord is correctly plugged into the printer and the outlet, and then turn on the printer. Contact your local Xerox service representative with the fault information. Check the fault history. For more information see Control Panel Messages on page 219. 178 WorkCentre 6400 Multifunction Printer User Guide