Xerox 6400S WorkCentre 6400 User Guide - Page 206
Image is Blurred or Stained, Print Density is Uneven
UPC - 095205743579
View all Xerox 6400S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
Troubleshooting Image is Blurred or Stained Probable Causes Solutions One or more of the imaging units may be defective. Remove the imaging units one at a time, and check for damage. If it is damaged, replace it. One or more of the toner cartridges may be defective. Remove the toner cartridges and check each for damage. If one or more is damaged, replace it. The two grey dials on the fuser are adjusted for envelope printing. Rotate both grey dials on the fuser to the paper setting. Print Density is Uneven Probable Causes Solutions One or more of the toner cartridges may be defective Remove the toner cartridges and check for damage. or low. If it is damaged, replace it. One or more of the imaging units may be defective. Remove the imaging units one at a time, and check for damage. If it is damaged, replace it. The printer is not level. Place the printer on a flat, hard, level surface. The grey dials on the fuser are set for envelope printing. Specialty paper in use. Rotate both grey dials on the fuser to the paper setting. Perform the "Calibrate Paper Type" calibration in the Tools/Calibration menu. 206 WorkCentre 6400 Multifunction Printer User Guide