Xerox 7300DN Trays and Paper Guide - Page 10

Trays 4. Insert a stack of paper into the tray. Depending on the size and type of paper, load the paper long-edge feed or short-edge feed. For information on custom size paper, refer to page 8. Long-edge feed Short-edge feed I Use for the following sizes: Letter, A4, and B5 JIS. I Use for transparencies (in Tray 1 only). Transparencies should NOT be loaded in Trays 2 - 5. I Place the side to be printed facedown with the top of the page at the back of the tray. I Prepunched holes should be on your right as you face the printer. I Use for the following sizes: Legal, Tabloid (11 x 17 in.), Tabloid Extra (12 x 18 in.), Executive, US Folio, A3, SRA3, A5, A6, and B4 JIS. I Place the side to be printed facedown with the top of the page on your right as you face the printer. I Prepunched holes should be towards the front of the tray. 20)5-4 %! 20)5-4 %! 7300-38 7300-39 5. Slide the tray back into the printer and turn to the front panel. 6. When the front panel prompts you: I If you haven't changed the type of paper, press the OK key to accept the current setting for paper type. I If you have changed the type of paper, scroll to the correct paper type and press the OK key to save your selection. OK Note 6200-45 To avoid possible print-quality and paper-feed problems, make sure that the tray's paper type setting matches the loaded paper type. Phaser® 7300 Color Printer 5