Xerox 7300DN Trays and Paper Guide - Page 13

Trays 4. When the front panel prompts you and you haven't changed the type or size of paper, press the OK key to accept the current settings for type and size. 5. If you have changed the type or size of paper: a. On the printer's front panel, scroll to Change (by pressing the Down Arrow key) and press the OK key. b. Scroll to the correct paper type and press the OK key to save your selection. c. Scroll to the correct paper size and press the OK key to save your selection. OK 6200-45 Using custom size paper In addition to the wide variety of paper sizes available for this printer, you can use custom size paper. Depending on the size, custom size paper can be loaded in Tray 1 or the Multi-Purpose Tray (as described on page 11). X dimension Y dimension Tray 1 148 mm - 328 mm 5.83 in. - 12.60 in. 148 mm - 457 mm 5.83 in. - 18 in. Multi-Purpose Tray 105 mm - 328 mm 4.13 in. - 12.60 in. 148 mm - 914 mm 5.83 in. - 36 in. Note Note After you load a custom size paper in any of this printer's trays, you MUST set the front panel values to agree with the paper you have loaded. Banner paper (paper over 18 inches (450 mm) long must be loaded into the Multi-Purpose Tray. You MUST use the Left Side Output Tray for output. See "Output Trays" on page 26. Phaser® 7300 Color Printer 8