Xerox 7300DN Trays and Paper Guide - Page 14
Loading custom size paper in Tray 1, Menus, Printer Setup Menu, Tray Setup Menu, Set Custom X
View all Xerox 7300DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Trays Loading custom size paper in Tray 1 1. Open the tray, as described on page 3. 2. Insert the custom size paper and adjust the guides to match the size of the paper. Place the side to be printed facedown. 1 2 7300-82 3. When the front panel prompts you to confirm the type of paper, scroll to the correct paper type and press the OK key to save your selection. OK 6200-45 4. Set the tray for custom size paper and specify the dimensions: a. On the front panel, with Menus highlighted, press the OK key. b. Scroll to Printer Setup Menu (by pressing the Down Arrow key) and press the OK key. c. Scroll to Tray Setup Menu and press the OK key. d. Scroll to Tray # Setup Menu (where # is the number of the tray) and press the OK key. e. If you don't see a selection for Set Custom X, scroll to Custom Size and press the OK key to change Custom Size to On. f. Scroll to Set Custom X and press the OK key. g. Press the Down Arrow or Up Arrow key to scroll to the value for X (labeled 1 in the illustration in Step 2) and then press the OK key. h. Scroll to Set Custom Y and press the OK key. i. Press the Down Arrow or Up Arrow key to scroll to the value for Y (labeled 2 in the illustration in Step 2) and then press the OK key. Phaser® 7300 Color Printer 9