Xerox 7760GX User Guide - Page 22
Overview of Network Setup and Configuration - driver download
UPC - 095205225396
View all Xerox 7760GX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Overview of Network Setup and Configuration Overview of Network Setup and Configuration To set up and configure the network: 1. Turn on the printer and the computer. 2. Connect the printer to the network using the recommended hardware and cables. 3. Print the Configuration page and keep if for referencing network settings. 4. Configure the printer's network address, which is required to identify the printer on the network. ■ Windows operating systems: Run the Installer on the Software and Documentation CD-ROM to automatically set the printer's IP address if the printer is connected to an established TCP/IP network. You can also manually set the printer's IP address on the control panel. ■ Macintosh systems: Manually set the printer's network address (for TCP/IP) on the control panel. 5. Install the driver software on the computer from the Software and Documentation CD-ROM. For information on driver installation, see the section in this chapter for the specific operating system you are using. Note: If the Software and Documentation CD-ROM is not available, you can download the latest driver from www.xerox.com/office/drivers. For more detailed networking information, see the Advanced Features Guide at www.xerox.com/office/7760support. Phaser® 7760 Color Laser Printer 2-2