Xerox 790DP Fiery SI Color Server User Guide - Page 28
Printing s from the bypass tray, Override Print Settings, Bypass Tray
UPC - 042215474375
View all Xerox 790DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
22-4 Printing with Macintosh Computers 8. Click Save after you change the options to make the new settings your default settings. For information about these options, see Appendix D "Setting Job Overrides." 9. Click OK to accept your options, and click Print to print. Printing pages from the bypass tray You can use the Fiery SI to print manually fed pages on the copier if you want to print on special paper or transparencies. You can use the Fiery SI to print on 16-24 pound paper (60-90 gsm), thick paper (28-32 pound/105-120 gsm) or Xerox-recommended transparencies from the bypass tray. You can also use the bypass tray for paper sizes such as A6 and 11" x 18" (model 5750 only). There are several ways to print manually fed pages: • From the Control Panel, you can set Enable Bypass Tray as default to Yes to print all jobs from the Bypass Tray unless another tray is specified. • From within the Fiery XJ Spooler, select a job, choose Override Print Settings and set the Bypass Tray option to On. • For many applications, you can use the following procedure and choose Bypass Tray in the Print or Page Setup dialog box. TO PRINT PAGES USING THE BYPASS TRAY: 1. Make sure that the Use Bypass Tray option on the copier panel is set to No. NOTE: If you select Bypass as your paper supply on the copier, the copier will be in Copier Mode and unavailable for printing. 2. Load paper or transparencies into the bypass tray. You can load up to 40 sheets. 3. Press the Clear All button on the copier.