Xerox 790DP Fiery SI Color Server Administration Guide - Page 104
NET_WIPX.DLL, of the following files
UPC - 042215474375
View all Xerox 790DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
44-11 Troubleshooting the Fiery SI • Fiery SI Setup-you must have enabled the appropriate network protocol, entered the correct parameters (for example, for TCP/IP, the IP address, etc.; for IPX, the Ethernet frame type setting), and you must have published the Print queue. You can check these settings quickly by printing a configuration page. • On your workstation-you must have the appropriate network protocol(s) loaded, your Windows directory should contain your edited NET_WSCK.INI file, with the correct name entries as summarized in the table above, and your System folder should contain only one of the following files: NET_WIPX.DLL if the workstation is running IPX/SPX protocols, or NET_WSCK.DLL if the workstation is running TCP/IP protocols. • If you are running the utilities over IPX/SPX, make sure the NET_WSCK.INI file contains the correct Ethernet or token ring IPX address of your color server.