Xerox 790DP Fiery SI Color Server Administration Guide - Page 23
Back view of the FierySI, Shut down the Fiery SI before connecting it to any network device
UPC - 042215474375
View all Xerox 790DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
11-12 Connecting to the Network Back view of the Fiery SI Centronics-type parallel connector AUI connector for thinnet and thicknet RJ-45 connector for twisted pair Ethernet Serial port for densitometer (for calibration) SCSI connector for external CD-ROM drive Copier connector slot Slots for options, for example token ring Power switch ! Shut down the Fiery SI before connecting it to any network device. NOTE: Do not attach the cable to more than one Ethernet connector on the Fiery SI at one time. TO USE THINNET CABLE: 1. With the Fiery SI turned off, connect the transceiver to the AUI connector on the back of the Fiery SI. Press down on the latch to lock the transceiver connection. 2. Connect the thinnet cable to the BNC connector on the transceiver. 3. Configure network servers for printing and then proceed to Setup.