Xerox 790DP Fiery SI Color Server Administration Guide - Page 98
Troubleshooting the Fiery SI, After this Setup screen, This message, Means, ENTER LOGIN NAME, guest
![]() |
UPC - 042215474375
View all Xerox 790DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
44-5 Troubleshooting the Fiery SI After this Setup screen: This message: Means: Add Server, Enter Your Login Name, Enter Your File Server Password No NetWare print server found. No print server was found when Fiery SI queried the file server you selected. You must configure a print server and a print queue for every NetWare file server that will handle Fiery SI print jobs (see page 3-4). Any IPX (Novell) setup screen Novell error code, followed by a message. Novell NetWare has reported an error. The Control Panel reports the error number and displays a brief explanatory message. For the most common errors (listed in the following table), a screen is displayed that enables you to retry the action that evoked the error, such as adding a server. If that is not possible, you are prompted to notify the Novell administrator, who will need to troubleshoot the network. Consult NetWare Administrator documentation for further explanation of Novell error codes. In the Network Setup, when you are configuring your IPX (Novell) connection, the Fiery SI queries the network for Novell file servers and print servers, and attaches to them temporarily. If a guest login is enabled, it will be used. If not, you'll be prompted to log in from the Fiery SI Control Panel. If the selected NetWare file server does not have a guest account, or if the guest account has expired or has been disabled by the NetWare supervisor, you will be prompted to notify the IPX (Novell) administrator. In that case, you (or the supervisor) have two options: • Enable a guest account on the NetWare server for the purpose of setup. • Log in to a different account. At the ENTER LOGIN NAME screen, change the default name (guest) to supervisor or enter another valid login name. When you are prompted for a password, enter the correct password for the account you named. For any Novell error, make sure your IPX (Novell) network is connected to the Fiery SI, the server you are trying to access is running, it has been configured with a print server and queue for the Fiery SI, and you have the appropriate permissions. On Ethernet networks, make sure the IPX (Novell) server is using the same Ethernet frame type you have set on the Fiery SI in Network Setup.
![](/manual_guide/products/xerox-750dp-fiery-si-color-server-administration-guide-5bc20ba/98.png)