Xerox 790DP Fiery SI Color Server Administration Guide - Page 15
Quick path to installation
UPC - 042215474375
View all Xerox 790DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
11-4 Connecting to the Network Quick path to installation The diagrams in the following pages show typical systems that can be used for printing and for using the Fiery SI utilities. To use the diagrams, find the page with your preferred platform and network type. Then look up the setup procedures in the pages and books referred to in the keys. The diagrams describe devices that use the supported networking protocols. They are logical diagrams and are not intended to describe the physical arrangement (topology) of devices on the network. A variety of physical arrangements is possible with each logical arrangement. For example, twisted pair Ethernet networks commonly use a star configuration around a hub, rather than a bus arrangement. The design of physical networks is beyond the scope of this manual. If the network uses more than one protocol or more than one type of workstation, combine the setups listed for each component of your system. Note that multiple protocols (shown in the diagrams as parallel lines) can run on the same cable. A solid connection from the Fiery SI with an arrow indicates that other supported network types can be operational at the same time. The protocols used in these diagrams are indicated as follows: IPX (Novell) AppleTalk lpd (TCP/IP) Parallel Other