Xerox 790DP Fiery SI Color Server Administration Guide - Page 57
Densitometer, Calibration Method, Copier, glass, Copier glass, Print Comparison
![]() |
UPC - 042215474375
View all Xerox 790DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
22-33 Network Setup options Select Target Copier Target/SWOP/EuroScale/DIC/Linear/User-defined [Copier Target] Specify the goal of this calibration by choosing a calibration target from a list of targets on the Fiery SI hard disk. The list includes targets provided with the color server and targets previously saved from the Fiery XJ Print Calibrator utility. The provided targets include one based on color measurements of your particular copier or printer, targets based on press standards, and a target to linearize your output. Print Measurement Page Yes/No [Yes] Choose this option to print a page of known color data for measurement. You are notified that the copier is printing a measurement page without calibration. If you selected Densitometer as the Calibration Method, the Fiery SI prints a page of color swatches that you feed through the X-Rite densitometer. If you selected Copier glass, it prints a page of graduated colors that you place on the copier glass. Measure Page Yes/No [Yes] Select Yes to measure the colors on the measurement page. The densitometer configures itself for reading the swatches on the measurement page. You are prompted to position the cyan strip for measurement. The configuration process takes up to 15 seconds and is repeated before reading each strip. The densitometer feeds the paper through and collects the cyan measurements. When it has processed the cyan measurements, you are prompted to insert the magenta, yellow and black strips in turn. If you previously selected Copier glass as the Calibration Method, you are prompted to position the page on the copier and press OK. If you select No, measurement is skipped and the Print Comparison Page option is displayed. Print Comparison Page Yes/No [Yes] Specify Yes if you want the Fiery SI to print a page with two versions of a test image, one using a calibration based on your most recent measurements and the selected target, and one with no calibration.
![](/manual_guide/products/xerox-750dp-fiery-si-color-server-administration-guide-5bc20ba/57.png)