Xerox 8560DN User Guide - Page 118
Moving and Repacking the Printer, Phaser® 8560 Color Printer, seconds, minutes - printhead
UPC - 095205733280
View all Xerox 8560DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Moving and Repacking the Printer 3. Within 10 seconds after turning off the printer, select Shut Down for Moving Printer on the control panel. Note: If you receive a Power Down Error-Head not Parked message at the control panel, the printer is not ready to be moved. If the printhead is not locked, the printer can be damaged during shipment. 4. Verify that the flag in the exit tray is in the raised position. When the flag is raised, the printhead is locked. 8560p-099 5. Wait for the printer to complete the cool-down period for the ink to solidify. The fan shuts down when it is cool enough to move. Caution: If you turn off the printer but do not select Shut Down for Moving Printer on the control panel, the fan does not run, so you must wait longer for the ink to solidify. Wait at least 30 minutes for the printer to cool completely before moving or packing it. 6. Unplug the printer after the cool-down cycle is complete. 7. Use the hand holds on each side of the printer to lift it. Move the printer separately from the 525-Sheet Feeder. 28 kg 60 lb. Phaser® 8560 Color Printer 5-18