Xerox D1015 User Manual - Page 22
Making Hard Drive-to-Disc Copies, Xerox Duplicator, Performance, Stability, Convenience
View all Xerox D1015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Making Hard Drive-to-Disc Copies Copying from the hard drive is the best way to make copies. Overall, there are four benefits to copying from the hard drive. ■ Performance. Duplicating from the hard drive will greatly boost the duplication performance. ■ Stability. Duplicating from the hard drive will stabilize the duplication process as compared to disc-to-disc duplicating. ■ Durability. The hard drive is a much better storage device than DVD recordable discs. The recording surface of a CD/DVD disc is exposed and can very easily be scratched on its surface, while hard drives are covered with metal and mounted inside the duplicator. ■ Convenience. With your master discs stored inside the hard drive, you can have access to each one easily. There is no need to carry your master discs; they are all stored inside the duplicator. NOTE: In this tutorial, the term partition(s) is also used to refer to image files in the hard drive. A partition will be created when you begin to load to a master disc image into the hard drive. The number of partitions the hard drive can hold is determined by the capacity of your hard drive and the size of the partitions you create. Note: Hard drive manufacturers use conversion rates of 1 Gigabyte = 1 billion bytes or 1000^3 bytes. However, most operating systems, including our duplication system use standard conversion rates of 1 Gigabyte = 1.074 billion bytes or 1024^3 bytes. Therefore, for an advertised 80 Gigabyte hard drive (80 billion bytes), the duplication system capacity is actually 74.5 billion bytes (74.5 Gigabytes). The following steps will show you how to load your master disc into the installed hard drive as a partition and copy the stored partition onto blank discs. This process is recommended for mass volume production. A master disc image can be loaded onto the hard drive from one of two ways: ■ It can be loaded into a disc image by reading the master disc from one of the CD-ROM/DVD drives (usually the reader Drive) ■ It can be written to the duplicator from an external PC over the USB connection. Note: The Xerox Duplicator USB Installation Utility must be installed. Xerox Duplicator 22