Xerox D1015 User Manual - Page 30
Xerox Duplicator, Step 6, a drive on the duplicator. Partitions that were loaded directly
![]() |
View all Xerox D1015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Choose Partition: [FUN.VEF] 714MB Note: Partitions that have a .VEF extension were loaded using a drive on the duplicator. Partitions that were loaded directly to the duplicator's hard drive from a PC have a .ISO extension. Step 6: Choose the desired partition to copy from using the up or down button and press the >> button to submit your selection. You should then see the Counter Selection menu. Counter: No Counter The Counter Selection menu will let you to choose how many copies you want to make for your project. This counter selection feature will allow the duplicator to count the number of copies you have made and prompt you when the desired number of copies has been made. You can select "No Counter" if you prefer to copy continuously with no interruption. (It will still count the number of copies, but it will not notify you when to stop.) To select the No Counter, simply press the >> button when you see the above screen. Then skip below and continue to Step 8. Or, you can select specify counter to between 1 to 9999 by pressing the up or down navigation button to the following screen. Counter: Specify Counter Then press >> button to submit. You should see the following screen. Specify Counter: [0] OK? To specify the number of copies for your project, you need to enter or input a 4-digit number. If you are planning to specify a number that is less than 4 digits, fill the leading spaces with 0s (any leading zero will be skipped). An example of that 4-digit number could be 0234 (two hundred thirty four), or 0010 (ten). Remember, the beginning 0s are skipped, therefore, 0010 means 10, which is the number ten. Xerox Duplicator 30
![](/manual_guide/products/xerox-d105-user-manual-ba8e6c3/30.png)