Xerox D1015 User Manual - Page 37
How to Rename a Hard Drive Partition Name from the Front Panel, Xerox Duplicator, Step 1
View all Xerox D1015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
How to Rename a Hard Drive Partition Name from the Front Panel NOTE: In this tutorial, the term partition(s) is also used to refer to image files in the hard drive. When you create a partition by either loading your master disc to the hard drive partition, or loading a partition using the PC, you are asked to give it a name. However, if you don't like the name you entered before, you can rename it at anytime afterwards (including reserved partitions). To rename your existing hard drive partition name, do the following: Step 1: Use the up or down arrow button to navigate to the following screen. XEROX 2.14 10. Hard Drive Setup Step 2: Press >> to enter the Hard Drive Setup menu and you should see the following screen. Hard Drive Setup 1. Select Partition Step 3: Use up or down arrow button to navigate to the following screen. Hard Drive Setup 3. Rename Partition Step 4: Press >> to enter Rename Partition menu and you should see the following screen. Choose Partition [FUN.VEF] 4000MB Note: Partitions that have a .VEF extension were loaded using a drive on the duplicator. Partitions that were loaded directly to the duplicator's hard drive from a PC have a .ISO extension. Step 5: Use the up or down arrow button to find the desired partition and then press >> to submit your selection. You should see the following confirmation screen. 37 Xerox Duplicator