Xerox D1015 User Manual - Page 54
Xerox Duplicator, Step 3, and up to 1 minute for DVD duplication. This is caused by
View all Xerox D1015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
AUTOCOPY Waiting for Master Step 3: Insert your master disc into the top Reader tray and your blank discs into corresponding Writer trays. Be sure to close the trays after you load the discs into them. (You can automatically close all trays by pressing >> when the screen shows "Waiting for Blanks"). Step 4: Allow 5-10 seconds for the duplicator to detect your master and blank discs. After your master and blank discs have been recognized, then you should see the following screen. Processing Please Wait Step 5: After 2 or 3 seconds of processing time, the following Copy Progress Screen will appear. Copying 0 12% 4012MB 481MB ■ 4012MB indicates the total capacity of the master disc. ■ The 0 indicates that zero successful copies have been made so far. ■ 12% indicates the current progress of the duplication. ■ 481MB indicates the current progress of the duplication in terms of MB. Note: It is normal to see the progress indicator stay at 0-10% and 100% for approximately 30 seconds for CD duplication and up to 1 minute for DVD duplication. This is caused by the initializing and finalizing stages. Step 6: Once the duplication run is completed, the successful copies will be ejected and you should see the following screen. Xerox Duplicator 54