Xerox XD130DF User Guide - Page 60

Problem Solving Printing Solution Chart Problem Probable Cause Remedy The The IEEE-1284 Parallel WorkCentre cable is not connected does not print properly. Check the cable connection. The IEEE-1284 parallel cable is defective. Check the cable with a computer and printer that work. If printing is still not possible, replace the cable. The port setting is incorrect. Check the printer settings in the Windows Control Panel to make sure that the print job is being sent to the correct port. (For Example: LPT1.) The toner and drum Check that the toner and cartridges are not installed drum cartridges are installed properly. properly. The printer driver may not Reinstall the WorkCentre be installed properly. printing software. The parallel port cable specifications may not be correct. Use the IEEE-1284 parallel port cable supplied with the machine or replace it with an IEEE-1284 compliant cable. Half of the page is blank The page layout is too complex. The page orientation may be incorrect. There may be too many applications open. Reduce the resolution setting from 600 dpi to 300 dpi. Install more RAM in the computer. Change the page orientation in the printer setup dialog. Try closing other applications before printing. Reduce resolution from 600 dpi to 300 dpi. Install more RAM in the computer. 52