Xerox XD130DF User Guide - Page 62

Problem Probable Cause Remedy Character voids The paper may be too dry. Try printing with a different batch of paper. Background The paper may be too scatter damp. Try printing with a different batch of paper. Do not open packages of paper until necessary so that the paper does not absorb too much moisture from the air. Printing over uneven surfaces. If printing onto envelopes, change your printing layout to avoid printing over areas that have overlapping seams on the reverse side. Missing characters The paper may be too damp. Try printing with a different batch of paper. Do not open packages of paper until necessary so that the paper does not absorb too much moisture from the air. Back of The transfer roller may be Print a few blank pages to printout is dirty dirty. clean the transfer roller. Incorrect fonts TrueType fonts may be disabled. Use the Fonts dialog box in the Control Panel to enable TrueType fonts. Faded graphics Toner may be low. Remove the toner cartridge and shake it gently to evenly distribute the toner. Then reinstall the toner cartridge. Ensure that you have a spare toner cartridge. 54