Yamaha 500 YMC-700/500 Owners Manual - Page 17

Initial Setup 8 Check the confirmation screen, then select "Test". The following test screen appears: The remote control code being tested 11 When you find a proper remote control code, select "Save" to complete the registration. y • If you want to discard the setting and make a new setting, select "Change Code". • If this unit does not control the device with any of the codes provided for the brand, select "Learn Code" to recall the Remote Code Learning screen (☞ P. 40) and program the remote control code manually. 12 Select "Yes" to register another input source device and repeat steps 2 to 11 until all devices listed in the Quick Start Guide are set. NEXT CODE Virtual remote control Function of the selected button 9 Test some of the controls on the virtual remote control which is displayed on the screen to check whether the controls function correctly. u / d / j / i: Moves the highlight. ENTER: Tests the function. We recommend that you select some buttons besides " (Power On/Off)" to test the function. If controls do not function properly, select "NEXT CODE" at the left edge of the virtual remote control. The remote control code switches and you can try the next remote control code. (Example: from Yamaha1 to Yamaha2) Note If the brand has only one set of remote control codes, "NEXT CODE" does not function. 13 Select "No" to complete the input source device registration. 14 Select the first screen to be displayed when you turn on this unit by pressing POWER or CONTROL. For example, you can set this unit to display the cable box (STB) screen when you turn on this unit by pressing CONTROL. 10 When you find the remote control code works (or not), press BACK on the remote control to return to the confirmation screen. 16 En