Yamaha AW2400 Owner's Manual - Page 162
Using the Recall Safe function
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Using the Recall Safe function 17 Scene Memory Using the Recall Safe function You can specify that specific faders or specific channels will be excluded from Recall operations when the scene is changed either manually or from an external MIDI device. This function is called "Recall Safe." This is convenient, for example, if you are performing a mixdown while switching scenes, but want to control specific channels manually. 1 Call the RCL Safe page by either pressing the [SCENE] key as many times as necessary, or by pressing the [F2] key after pressing the [SCENE] key. The SCENE screen RCL Safe page will appear. D A B C 1 RCL.SAFE button This button switches Recall Safe between ENABLE and DISABLE. Move the cursor to this button and press the [ENTER] key to switch to either ENABLE or DISABLE. HINT • Pressing the [F1] key while holding the Display section [SHIFT] key has the same effect as the RCL.SAFE button. B MODE field The recall safe parameters can be selected from the following: • ALL button ...........This prevents all parameters in the scene from being recalled. The entire scene is "recall safe" and no change will occur if it is inadvertently recalled. • FADER button......Only the fader settings will not be recalled. • ON button Only the [ON] key settings will not be recalled. C EFFECT button Turn this button on to prevent recall (recall safe) of the effect settings. The button will appear inverted when on. D CHANNEL field Selects the recall safe channels. The mix parameters of selected channels will not be recalled. The CHANNEL field buttons correspond to the following channels. • INPUT Input channels 1-16 • EFFECT RETURN ..... Effect Return channels 1-4 • TRACK Track channels 1-24 • BUS Bus master 1, 2 • AUX AUX send master 1-4 • EFFECT SEND .......... Effect send master 1-4 • STEREO Stereo output channel HINT • All CHANNEL field buttons can be cleared (de-selected) by pressing the [F2] key while holding the Display section [SHIFT] key. 2 Select the parameter(s) or channel(s) that you want to set to Recall Safe, and activate the corresponding button(s). 3 Move the cursor to the RCL.SAFE button and press the [ENTER] key. Recall Safe has now been enabled. The selected parameter(s) and/or channel(s) will not be affected by scene recall operations until you change this setting. HINT • The RCL Safe page settings are shared by all songs. HINT • Both the FADER and ON buttons can be on at the same time. • When the ALL button is turned on the FADER and ON buttons are automatically turned off. NOTE • Effect return settings are not affected by Recall Safe. 162 AW2400 Owner's Manual