Yamaha AW2400 Owner's Manual - Page 210
AW2400 Preferences, DIGITAL OUT COPYRIGHT button
View all Yamaha AW2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
AW2400 Preferences AW2400 Preferences The UTILITY screen Preference page provides a number of basic "preference" parameters for the AW2400 operating environment, including digital input/output setup, copy protection, and others. To call this page press the Work Navigate section [UTILITY] key as many times as necessary, or press the [F2] key after pressing the [UTILITY] key. G L B CD/DAT DIGITAL REC button Enables or disables digital recording from the DIGITAL STEREO IN jack, and importing of digital audio data from an audio CD or WAV file inserted in the CD-RW drive. When this parameter is ON, the following message will be displayed. A B H M C D E N F JK I This page contains the following items. 1 DIGITAL OUT COPYRIGHT button Specifies whether SCMS (Serial Copy Management System) copy protect flags will be written into the digital signal that is output from the DIGITAL STEREO OUT jack. Protect is enabled if the button is set to ENABLE, and disabled if the button is set to DISABLE. If copy protect is enabled, you will be able to copy the signal from the DIGITAL STEREO OUT jack to an MD or DAT recorder, but it will not be possible to make a secondgeneration digital copy from that data. ● When copy protect is enabled AW2400 DIGITAL OUT COPYRIGHT= ENABLE If you agree to the conditions stipulated in the "Copyright Notice" (→ p. 7), select [OK]. Recording and importing of digital audio data will be enabled when you select [OK]. HINT • The CD/DAT DIGITAL REC button will always be set to the default DISABLE setting when you turn on the power. C NUDGE PLAY MODE Selects the playback method that will be used by the Nudge function (a function that lets you use the [JOG ON] key and [DATA/JOG] dial to search for a location). Press the [ENTER] key to confirm your selection. • AFTER .......... Play repeatedly for the duration specified by the NUDGE TIME, starting at the current location. • BEFORE ....... Play repeatedly for the duration specified by the NUDGE TIME, ending at the current location. MODE: BEFORE Current location MODE: AFTER Current location 21 DIGITAL STEREO OUT jack Digital recording possible Utility functions DAT or MD, etc. Digital recording not possible 210 AW2400 Owner's Manual D NUDGE TIME Specifies the duration (Nudge Time) of each repeat played by the Nudge function. The nudge time can be set from 25 to 800 ms in 1 ms (millisecond) steps. E PREROLL TIME Specifies the duration of the preroll (the amount of playback time before the punch-in point) when you use Auto Punch-in from 0 to 20 seconds.