Yamaha AW2400 Owner's Manual - Page 221

Erasing CD-RW media Erasing CD-RW media Here's how to erase all data that has been written to CD-RW media so that the CD-RW disc can be used to record new data. You will need to perform this operation on a disc that has been used to store data from a computer or other equipment if you want to use that disc with the AW2400. HINT • Since data is erased as necessary when you back up AW2400 data to CD-RW media or when you write audio data to CD-RW media, you do not need to perform the following procedure each time you re-use the disc. NOTE • The erased data cannot be recovered. Perform this operation with care. 1 Call the CD screen Setting page by either pressing the Work Navigate section [CD] key as many times as necessary, or by pressing the [F3] key after pressing the [CD] key. 2 Move the cursor to the CD-RW MEDIA ERASE field, and press the [ENTER] key to select the desired erasure method. The buttons select the following erasure methods. • SIMPLY button ...........Only the TOC (Table Of Contents) data written to the CDRW disc will be erased. This is the quickest way to erase a CD-RW disc. • PERFECTLY button ...All data written to the CDRW disc will be erased completely. This method erases all data from the media and thus will take longer than the SIMPLY option. Move the cursor to the appropriate button and press the [ENTER] key. A popup window will ask you to confirm the erasure. ● If you turn on the SIMPLY button ● If you turn on the PERFECTLY button HINT • Pressing the [F1]-[F2] keys while holding the Display section [SHIFT] key has the same effect as the SIMPLY ([F1] key) and PERFECTLY ([F2] key) buttons, respectively. 3 To execute the erasure move the cursor to the OK button. If you decide not to erase the disc move the cursor to the CANCEL button. Then press the [ENTER] key. Erasure will begin if you selected the OK button. (This operation cannot be halted.) Creating an audio CD 22 AW2400 Owner's Manual 221