Yamaha CDX-480 Owner's Manual - Page 13

PROGRAM PLAY You can enjoy listening to your favorite tracks in any desired order using programmed play. As many as 25 tracks can be programmed. 2 OPEN/CLOSE DIMMER TIME PROG TAPE CLEAR PEAK SPACE 1 S/F 2 RANDOM REPEAT 3 +10 4 5 6 7 8 9 0 SKIP PAUSE PLAY SEARCH INDEX STOP - OUTPUT LEVEL + SYNCHRO 3 4 1 1 Stop the unit. STOP 3 Select the desired track. 5 2 PROG PROGRAM TOTAL * Repeat this operation to program more tracks. You can select the same track again. 4 PLAY Display information during program play PROGRAM TOTAL  PROGRAM 1 2 3 4 5 6 TOTAL Œ Ž  Œ Shows the program number for the track to be set next.  Shows the selected track number. Ž Shows the total time of the tracks currently programmed.  Shows only the numbers of programmed tracks. * If the total time becomes 100 minutes or more, the highest position of the figure will not be displayed. Notes • In step 2, if "P-01" does not appear in the display, press the TIME display mode-select button. • If, during programming, the TIME display mode-select button is pressed, the program number display can be changed to display the total time of the programmed tracks. To return to the previous display, press the TIME display mode-select button once again. • The SKIP ( and ) button can be used during playing, but only within the range of the programmed tracks. • The SEARCH ( and ) button can be used during playing to search through all tracks, including unprogrammed tracks. • The PAUSE mode can also be programmed (one time only), if so desired, by pressing the TAPE button instead of a numeric button. (In this case, " B" is illuminated in the display.) • If, for a compact disc with 25 tracks or more, track number 25 or higher is programmed, the total time will disappear from the display. 13