Yamaha CL3 Cl Editor Owner's Manual - Page 15
ST IN window, Input patch, HA HA analog gain, 48V Phantom power, Ø Phase, Digital Gain
View all Yamaha CL3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ST IN window In this window you can view and edit the mix parameters of ST IN channels 1-8. The parameters shown in the window can be selected from the [View] menu or the menu that appears when you right-click ( key + click) in the window. You can access this window in the following ways. • From the [Windows] menu, choose [Overview] and then choose "ST IN" • Use the bank select keys in the Master window to turn on the [ST IN] button 34 1 Input patch Selects the input source that will be assigned to the ST IN channel. The input sources that 1 can be assigned are the same as for an INPUT CH (➥ p.12.) 2 2 HA (HA analog gain) Drag the knob in the screen to adjust the analog gain of the internal head amp or of the 5 external head amp patched to the ST IN channel. 6 3 48V (Phantom power) Switches on/off the phantom power (+48V) of the internal head amp or of the external head amp patched to the ST IN channel. 7 4 Ø (Phase) Inverts the phase polarity of the signal after AD conversion. 5 Digital Gain Drag the knob in the screen to adjust the input gain to each ST IN channel. 6 HPF (High Pass Filter) Switches the high pass filter on/off. You can drag the numeric value up or down to edit the cutoff frequency. 7 EQ (Equalizer) Switches the EQ on/off (the L/R settings are linked.) This is the same as the equalizer for INPUT CH (➥ p.13.) 15 CL Editor Owner's Manual