Yamaha CLP-170 Owner's Manual - Page 81

DSP effect* [DSPDepth]

Page 81 highlights

Detailed settings for the voices [VOICE SETTING] Turning the vibraphone vibrato effect on/off* [VibeRotorOnOff (RotorOnOff)] This will be displayed only if VibeRotor is selected for the DSP Type parameter explained above. It turns on/off the vibrato effect that is applied when you use the VibeRotor pedal. See the procedure on page 71. A B NO YES C D Setting range: On/Off Setting the rotation speed of the rotary speaker* [RotarySpeed (Rot.Speed)] This will be displayed only if RotarySpeaker is selected for the DSP Type parameter explained above. It sets the rotation speed of the rotary speaker effect. See the procedure on page 71. Adjusting the brightness of the sound* [Brightness] See the procedure on page 71. Setting range: -64-+63 Adjusting the resonance effect* [HarmonicContent (Harmonic)] See the procedure on page 71. Setting range: -64-+63 Setting range: Slow/Fast Adjusting the depth of the DSP effect* [DSPDepth] This sets the depth of the DSP effect (page 80). Some DSP Type settings do not allow you to set the DSPDepth. See the procedure on page 71. TIP Resonance can produce a distinctive "peaky" tone, making the sound brighter and harder. Setting range: 1 (output only the original sound with almost no effect applied)-127 (output only the sound processed by the effect) CLP-170/150 81

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124

CLP-170/150
81
Detailed settings for the voices [VOICE SETTING]
This will be displayed only if VibeRotor is selected
for the DSP Type parameter explained above.
It turns on/off the vibrato effect that is applied
when you use the VibeRotor pedal.
See the procedure on page 71.
Setting range:
On/Off
This will be displayed only if RotarySpeaker is
selected for the DSP Type parameter explained above.
It sets the rotation speed of the rotary speaker effect.
See the procedure on page 71.
Setting range:
Slow/Fast
This sets the depth of the DSP effect (page 80).
Some DSP Type settings do not allow you to set the
DSPDepth.
See the procedure on page 71.
Setting range:
1 (output only the original sound with almost no
effect applied)–127 (output only the sound pro-
cessed by the effect)
See the procedure on page 71.
Setting range:
–64–+63
See the procedure on page 71.
Setting range:
–64–+63
Resonance can produce a distinctive “peaky” tone, mak-
ing the sound brighter and harder.
Turning the vibraphone
vibrato effect on/off* [VibeRo-
torOnOff (RotorOnOff)]
Setting the rotation speed of
the rotary speaker* [Rota-
rySpeed (Rot.Speed)]
Adjusting the depth of the
DSP effect* [DSPDepth]
C
A
D
B
NO
YES
Adjusting the brightness of the
sound* [Brightness]
Adjusting the resonance
effect* [HarmonicContent
(Harmonic)]
TIP