Yamaha CLP-411 Owner's Manual - Page 10

Selecting & Playing Voices Turn Power On After making sure that the Clavinova's AC cord is properly plugged into the Clavinova itself and plugged into a convenient AC wall outlet, POWER press the [POWER] switch located to the left of the keyboard to turn the power ON. In some areas a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area. When the power is turned ON, one of the voice selector LEDs will light. MASTER VOLUME MIN MAX Set the Volume Initially set the [MASTER VOLUME] control about half way between the "MIN" and "MAX" settings. Then, when you start playing, re-adjust the [MASTER VOLUME] control for the most comfortable listening level. Select a Voice ...Select the desired voice by pressing one of the voice selectors. Use the [VARIATION] button to select a variation of the current voice, as required. CLP-511 PIANO 1 HARPSI- PIPE PIPE PIANO 2 CLAVI.TONE E.PIANO 1 E.PIANO 2 CHORD STRINGS ORGAN 1 ORGAN 2 VARIATION CLP-411 HARPSI- PIPE PIPE PIANO CLAVI.TONE E.PIANO 1 E.PIANO 2 CHORD ORGAN 1 ORGAN 2 VARIATION ROOM HALL 1 HALL 2 STAGE REVERB EFFECT Play ...The Clavinova also offers keyboard touch response, so the volume and timbre of notes played can be controlled according to how "hard" you play the keys. The amount of variation available depends on the selected voice. Add Effects As Required You can also change add reverb and/or a chorus effect as desired by using the [REVERB] and [EFFECT] buttons (see page 12 for [REVERB] button operation, and page 13 for [EFFECT] button operation). 6