Yamaha CLP-411 Owner's Manual - Page 24
The Function Mode
View all Yamaha CLP-411 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
The Function Mode The [FUNCTION] button provides access to a range of functions that give the CLP-411/511 extraordinary versatility. The functions are categorized in groups as follows: CLP-411 CLP-511 F1 F1 Tuning 21 F2 F2 Scale 21 F3 F3 Dual Mode Functions 22 - F4 Split Mode Functions 23 F4 F5 Metronome Functions 25 F5 F6 Left Pedal Mode 25 - F7 Piano Song Part Cancel Volume 25 F6 F8 MIDI Functions 26 - F9 Backup Functions 29 FUNCTION CLP-511 TRANSPOSE SPLIT CLP-411 HALL 2 STAGE TRANSPOSE REVERB To Select a Function Z Press the [FUNCTION] button so that its indicator lights. NOTE • Functions cannot be selected during demo/piano song playback or when the recorder is in operation. X Use the [] buttons (i.e. the [TRANSPOSE] and [RE- VERB] buttons on the CLP-411, or the [TRANSPOSE] and [SPLIT] buttons on the CLP-511) to select the desired function: F1 through F9 on the CLP-511; F1 through F6 on the CLP-411. q Operation Example Press [+/YES] (sub-mode) Use [] Press [-/NO] or [+/YES] once Use [-/NO], [+/YES] C In the case of the Dual Mode (F3), Split Mode (F4: CLP-511), Metronome (F4: CLP-411, F5: CLP-511), MIDI (F6: CLP-411, F8: CLP-511), and Backup (F9: CLP-511) functions, you will have to press the [+/YES] button once to enter the respective sub-mode after the function has been selected, and then use the [] buttons again to select the desired sub-function. NOTE • The Dual or Split (CLP-511) mode must be engaged before the F3 and F4 functions can be selected, respectively. If the corresponding mode is not engaged, "F3.-" or "F4.-" will appear on the display and the corresponding sub-mode will not be available. • The Dual mode can be engaged while in the Function mode, but the Function mode must be exited before the Split mode (CLP-511) can be engaged. V Set the function as required by using the [-/NO] and [+/YES] buttons (see the individual function descriptions, below). B Press the [FUNCTION] button so that its indicator goes out to exit from the function mode. 20