Yamaha CLP-411 Owner's Manual - Page 9

Connections - keyboard

Page 9 highlights

Connections CLP-511 CLP-411 34 MIDI IN OUT THRU HOST SELECT PC-2 PC-1 MIDI Mac TO HOST AUX IN R L/L+R AUX OUT R L/L+R 12 3 MIDI IN OUT 4 HOST SELECT PC-2 PC-1 MIDI Mac TO HOST 12 AUX IN R L AUX OUT R L/L+R CLP-511 AUX IN R L/L+R CLP-411 AUX IN R L DOU-10 AUX OUT R L/L+R Stereo System CLP-511 MIDI IN OUT THRU DOU-10 Tone Generator HOST SELECT PC-2 PC-1 MIDI Mac TO HOST Personal Computer 1 AUX IN L and R Jacks (CLP-511: L/L+R and R) These jacks are intended for use with an external tone generator module such as the Yamaha DOU-10 Disk Orchestra Unit. The stereo outputs from the external tone generator module are connected to the AUX IN L and R jacks, allowing the sound of the tone generator to be reproduced via the Clavinova's internal sound system and speakers. A line-level mono source can be connected to the L/L+R jack on the CLP511. NOTE • The input signal from the AUX IN jacks is delivered to the AUX OUT jacks, but is not affected by the Clavinova's volume control or reverb effect. 2 AUX OUT L/L+R and R Jacks The AUX OUT L/L+R and R jacks deliver the output of the Clavinova for connection to an instrument amplifier, mixing console, PA system, or recording equipment. If you will be connecting the Clavinova to a monaural sound system, use only the L/L+R jack. When a plug is inserted into the L/L+R jack only, the left- and right-channel signals are combined and delivered via the L/ L+R jack so you don't lose any of the Clavinova's sound. NOTE • The AUX OUT jack signal must never be returned to the AUX IN jacks, either directly or through external equipment. 3 MIDI IN, THRU (CLP-511) and OUT Connectors The MIDI IN connector receives MIDI data from an external MIDI device (such as the DOU-10 Disk Orchestra Unit) which can be used to control the Clavinova. The MIDI THRU connector provided on the CLP511 re-transmits any data received at the MIDI IN connector, allowing "chaining" of several MIDI instruments or other devices. The MIDI OUT connector transmits MIDI data generated by the Clavinova (e.g. note and velocity data produced by playing the Clavinova keyboard). More details on MIDI are given in "MIDI FUNCTIONS" on page 26. 4 TO HOST Connector & HOST SELECT Switch This jack and selector switch allow direct connection to a personal computer for sequencing and other music applications - without the need for a separate MIDI interface. See page 30 for details. q PHONES Jacks (Bottom Panel) Two pairs of standard pair of stereo headphones can be plugged in here for private practice or late-night playing. The internal speaker system is automatically shut off when a pair of headphones is plugged into either of the PHONES jacks. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54

5
Connections
1
AUX IN L and R Jacks (CLP-511: L/L+R and R)
These jacks are intended for use with an external tone generator
module such as the Yamaha DOU-10 Disk Orchestra Unit. The stereo
outputs from the external tone generator module are connected to the
AUX IN L and R jacks, allowing the sound of the tone generator to be
reproduced via the Clavinova’s internal sound system and speakers. A
line-level mono source can be connected to the L/L+R jack on the CLP-
511.
NOTE
The input signal from the AUX IN jacks is delivered to the AUX OUT jacks,
but is not affected by the Clavinova’s volume control or reverb effect.
2
AUX OUT L/L+R and R Jacks
The AUX OUT L/L+R and R jacks deliver the output of the Clavinova for
connection to an instrument amplifier, mixing console, PA system, or record-
ing equipment. If you will be connecting the Clavinova to a monaural sound
system, use only the L/L+R jack. When a plug is inserted into the L/L+R jack
only, the left- and right-channel signals are combined and delivered via the L/
L+R jack so you don’t lose any of the Clavinova’s sound.
NOTE
The AUX OUT jack signal must never be returned to the AUX IN jacks, either
directly or through external equipment.
3
MIDI IN, THRU
(CLP-511)
and OUT Connectors
The MIDI IN connector receives MIDI data from an external MIDI
device (such as the DOU-10 Disk Orchestra Unit) which can be used to
control the Clavinova. The MIDI THRU connector provided on the CLP-
511 re-transmits any data received at the MIDI IN connector, allowing
“chaining” of several MIDI instruments or other devices. The MIDI OUT
connector transmits MIDI data generated by the Clavinova (e.g. note and
velocity data produced by playing the Clavinova keyboard).
More details on MIDI are given in “MIDI FUNCTIONS” on page 26.
4
TO HOST Connector & HOST SELECT Switch
This jack and selector switch allow direct connection to a personal
computer for sequencing and other music applications — without the need
for a separate MIDI interface. See page 30 for details.
PHONES Jacks
(Bottom Panel)
Two pairs of standard pair of stereo headphones can be plugged in here
for private practice or late-night playing. The internal speaker system is
automatically shut off when a pair of headphones is plugged into either of
the PHONES jacks.
Tone Generator
MIDI
AUX IN
HOST SELECT
TO HOST
AUX OUT
MIDI
HOST SELECT
TO HOST
AUX IN
AUX OUT
CLP-511
CLP-411
12
3
4
3
4
12
AUX OUT
R
L
/
L+R
DOU-10
CLP-511
MIDI
IN
OUT
THRU
Personal Computer
HOST SELECT
TO HOST
PC-2
PC-1
Mac
MIDI
Stereo System
DOU-10
AUX IN
R
L
/
L+R
CLP-511
AUX IN
R
L
CLP-411