Yamaha CLP-411 Owner's Manual - Page 50

MIDI Data Format/MIDI-Datenformat/Format des données MIDI/Formato de datos MIDI

Page 50 highlights

MIDI Data Format/MIDI-Datenformat/Format des données MIDI/Formato de datos MIDI (5) XG Native Bulk Data (reception only) Data format: [F0H] -> [43H] -> [0nH] -> [4CH] -> [aa] -> [bb] -> [hh] -> [mm] -> [ll] -> [dd] ->...-> [cc] -> [F7H] F0 Exclusive status 43 YAMAHA ID 0n When n is received n=0~F, whichever is received. When n is transmitted n always=0. 4C Model ID of XG aa ByteCount bb ByteCount hh Address High mm Address Mid ll Address Low dd Data | | | | cc Check sum F7 End of Exclusive For information about "Address" and "Byte Count" fields, refer to attached tables. In the attached tables "TOTAL SIZE" partitions a data series into single bulk dumps. The "address" is the first byte of the bulk data. The checksum value is set such that the sum of Byte Count, Address, Data, and Checksum has value zero in its seven least significant bits. If too much bulk data is received at a time there is a chance of error. The total data for a bulk dump should not exceed 512 bytes, it is recommended that data be kept under 512 bytes with an interval time of 120msec or more between 512 byte bulk. (6) Clavinova MIDI Format Data format: [F0H] -> [43H] -> [73H] -> [3BH] -> [yy] -> [F7H] F0 = Exclusive status 43H = Yamaha ID 73H = Clavinova ID 3BH = CLP-411/511 ID yy = Substatus yy Information 02H Internal MIDI clock 03H External MIDI clock 06H Bulk Data * The bulk data follows 06H. * When yy=2, 3 or Clavinova common ID (01H) is recog- nized as well as 3BH. BULK DUMP FORMAT F0H, 43H, 73H nnH (Product ID: CLP-411=42H, CLP-511=43H) 06H (Bulk ID) 05H (Sequence data, Bulk Dump Format) 0xH, 0xH, 0xH, 0xH (Data length= xxxx bytes) [BULK DATA] (low, high........low, high) [CHECK SUM (1byte)] = 0-sum (BULK DATA) F7H (7) Special Control Data format: [F0H] -> [43H] -> [73H] -> [3BH] -> [11H] -> [0nH] -> [cc] -> [vv] -> [F7H] 43H = Yamaha ID 73H = Clavinova ID 3BH = CLP-411/511 ID 11H = Clavinova special control 0nH = Control MIDI change + channel number cc = Control number vv = Value Control 0nH ccH dd Split Point Always 00 14H 14H : Split Key Number(CLP-511) Metronome Always 00 1BH 00H : off 01H : - 02H : 2/4 03H : 3/4 04H : 4/4 05H : 5/4 06H : 6/4 07H : No accent Channel Detune ch: 00-0F 43H 00H-7FH Voice Reserve ch: 00-0F 45H 00H : Reserve off 7FH : on *1 When Volume, Expression is received for Reserve On, they will be effective from the next Key On. Reserve Off is normal. (8) Others Data format: [F0H] -> [43H] -> [1nH] -> [27H] -> [30H] -> [00H] -> [00H] -> [mmH] -> [llH] -> [ccH] -> [F7H] Master Tuning (XG and last message priority) simultaneously changes the pitch of all channels. F0H 43H 1nH 27H 30H 00H 00H mmH llH ccH F7H = Exclusive Status = Yamaha ID = Transmission from n=CLP is always 0. 0-F is received. = Model ID of TG100 = Sub ID = = = Master Tune MSB = Master Tune LSB = don't care (under 7FH) = End of Exclusive MIDI Parameter Change table ( SYSTEM ) Address (H) 00 00 00 01 02 03 04 05 06 7E 7F TOTAL SIZE Size (H) 4 1 1 1 07 Data (H) Parameter 020C - 05F4(*1) MASTER TUNE 00 - 7F - 34 - 4C(*2) 00 00 MASTER VOLUME - TRANSPOSE XG SYSTEM ON RESET ALL PARAMETERS Description -50 - +50[cent] 1st bit 3 - 0 → bit 15 - 12 2nd bit 3 - 0 → bit 11 - 8 3rd bit 3 - 0 → bit 7 - 4 4th bit 3 - 0 → bit 3 - 0 0 - 127 -12 - +12[semitones] 00=XG sytem ON 00=ON (receive only) Default value (H) 00 04 00 00 400 7F 40 *1: Values lower than 020CH select -50 cents. Values higher than 05F4H select +50 cents. *2: Values from 28 through 33 are interpreted as -12 through -1. Values from 4D through 58 are interpreted as +1 through +12. MIDI Parameter Change table ( EFFECT 1) Refer to the "Effect MIDI Map" for a complete list of Reverb, Chorus and Variation type numbers. Address (H) 02 01 00 0C TOTAL SIZE Size (H) 2 1 0E Data (H) 00-7F 00-7F 00-7F Parameter REVERB TYPE MSB REVERB TYPE LSB REVERB RETURN Description Refer to Effect MIDI Map 00 : basic type -∞dB...0dB...+6dB(0...64...127) Default value (H) 01(=HALL1) 00 40 02 01 40 2 TOTAL SIZE 21 00-7F 00-7F VARIATION TYPE MSB VARIATION TYPE LSB * "VARIATION" refers to the EFFECT on the panel. 46 Refer to Effect MIDI Map 00 : basic type 00(=Effect off) 00

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54

46
(5)
XG Native Bulk Data (reception only)
Data format: [F0H] -> [43H] -> [0nH] -> [4CH] -> [aa] ->
[bb] -> [hh] -> [mm] -> [
ll
] -> [dd] ->...-> [cc]
->
[F7H]
F0
Exclusive status
43
YAMAHA ID
0n
When n is received n=0~F, whichever is received.
When n is transmitted n always=0.
4C
Model ID of XG
aa
ByteCount
bb
ByteCount
hh
Address High
mm
Address Mid
ll
Address Low
dd
Data
|
|
|
|
cc
Check sum
F7
End of Exclusive
For information about “Address” and “Byte Count” fields, refer to
attached tables.
In the attached tables “TOTAL SIZE” partitions a data series into
single bulk dumps. The “address” is the first byte of the bulk data.
The checksum value is set such that the sum of Byte Count, Ad-
dress, Data, and Checksum has value zero in its seven least
significant bits.
If too much bulk data is received at a time there is a chance of
error. The total data for a bulk dump should not exceed 512 bytes,
it is recommended that data be kept under 512 bytes with an
interval time of 120msec or more between 512 byte bulk.
(6) Clavinova MIDI Format
Data format: [F0H] -> [43H] -> [73H] -> [3BH] -> [yy] ->
[F7H]
F0
= Exclusive status
43H
= Yamaha ID
73H
= Clavinova ID
3BH
= CLP-411/511 ID
yy
= Substatus
yy
Information
02H
Internal MIDI clock
03H
External MIDI clock
06H
Bulk Data
* The bulk data follows 06H.
* When yy=2, 3 or Clavinova common ID (01H) is recog-
nized
as well as 3BH.
BULK DUMP FORMAT
F0H, 43H, 73H
nnH
(Product ID: CLP-411=42H,
CLP-511=43H)
06H
(Bulk ID)
05H
(Sequence data, Bulk Dump Format)
0xH, 0xH, 0xH, 0xH
(Data length= xxxx bytes)
[BULK DATA]
(low, high
........
low, high)
[CHECK SUM (1byte)] = 0-sum (BULK DATA)
F7H
(7) Special Control
Data format: [F0H] -> [43H] -> [73H] -> [3BH] -> [11H] ->
[0nH] -> [cc] -> [vv] -> [F7H]
43H
= Yamaha ID
73H
= Clavinova ID
3BH
= CLP-411/511 ID
11H
= Clavinova special control
0nH
= Control MIDI change + channel number
cc
= Control number
vv
= Value
Control
0nH
ccH
dd
Split Point
Always
00
14H
14H :
Split Key Number
(CLP-511)
Metronome
Always
00
1BH
00H : off
01H : –
02H : 2/4
03H : 3/4
04H : 4/4
05H : 5/4
06H : 6/4
07H : No accent
Channel Detune
ch: 00-0F
43H
00H-7FH
Voice Reserve
ch: 00-0F
45H
00H : Reserve off
7FH : on
*1 When Volume, Expression is received for Reserve On, they will be
effective from the next Key On. Reserve Off is normal.
(8) Others
Data format: [F0H] -> [43H] -> [1nH] -> [27H] -> [30H] ->
[00H] -> [00H] -> [mmH] -> [llH] -> [ccH] -> [F7H]
Master Tuning (XG and last message priority) simultaneously changes the
pitch of all channels.
F0H
= Exclusive Status
43H
= Yamaha ID
1nH
= Transmission from n=CLP is always 0. 0-F is received.
27H
= Model ID of TG100
30H
= Sub ID
00H
=
00H
=
mmH
= Master Tune MSB
llH
= Master Tune LSB
ccH
= don’t care (under 7FH)
F7H
= End of Exclusive
MIDI Data Format/MIDI-Datenformat/Format des données MIDI/Formato de datos MIDI
<Table 1-1>
MIDI Parameter Change table ( SYSTEM )
Address (H)
Size (H)
Data (H)
Parameter
Description
Default value (H)
00 00 00
4
020C - 05F4(*1)
MASTER TUNE
-50 - +50[cent]
00 04 00 00
01
1st bit 3 - 0
bit 15 - 12
400
02
2nd bit 3 - 0
bit 11 - 8
03
3rd bit 3 - 0
bit 7 - 4
4th bit 3 - 0
bit 3 - 0
04
1
00 - 7F
MASTER VOLUME
0 - 127
7F
05
1
06
1
34 - 4C(*2)
TRANSPOSE
-12 - +12[semitones]
40
7E
00
XG SYSTEM ON
00=XG sytem ON
7F
00
RESET ALL PARAMETERS
00=ON (receive only)
TOTAL SIZE
07
*1: Values lower than 020CH select -50 cents. Values higher than 05F4H select +50 cents.
*2: Values from 28 through 33 are interpreted as -12 through -1. Values from 4D through 58 are interpreted as +1 through +12.
<Table 1-2>
MIDI Parameter Change table ( EFFECT 1)
Refer to the “Effect MIDI Map” for a complete list of Reverb, Chorus and Variation type numbers.
Address (H)
Size (H)
Data (H)
Parameter
Description
Default value (H)
02 01 00
2
00-7F
REVERB TYPE MSB
Refer to Effect MIDI Map
01(=HALL1)
00-7F
REVERB TYPE LSB
00 : basic type
00
0C
1
00-7F
REVERB RETURN
-
dB...0dB...+6dB(0...64...127)
40
TOTAL SIZE
0E
02 01 40
2
00-7F
VARIATION TYPE MSB
Refer to Effect MIDI Map
00(=Effect off)
00-7F
VARIATION TYPE LSB
00 : basic type
00
TOTAL SIZE
21
* “VARIATION” refers to the EFFECT on the panel.