Yamaha CP2000 Owner's Manual - Page 9
Parallel Hookup, PARALLEL Notes - process
View all Yamaha CP2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Parallel Hookup 5 Parallel Hookup In PARALLEL mode, the L and R channels operate independently but the input signal for both channels is sourced from the Channel L inputs. This mode is typically used with a mono source and allows independent volume control of two sets of speakers. The following hookup example shows how the CP2000 can be used in PARALLEL mode. STEREO BRIDGE PARALLEL CHANNEL R 2 1 3 INPUT STEREO BRIDGE PARALLEL OFF ON CHANNEL L (BRIDGE) NEUTRIK 2 1 3 YAMAHA SPEAKER PROCESSING MONO OUT 2 1 1 2 CHANNEL R (-) BRIDGE (+) SPEAKERS CHANNEL L Total impedance: 2Ω min (1000 W) 4Ω (650 W) 8Ω (450 W) Total impedance: 2Ω min (1000 W) 4Ω (650 W) 8Ω (450 W) Mixer PARALLEL Notes: • The input source must be connected to the Channel L inputs. • The Channel R inputs are inactive. • The Channel L and Channel R volume levels can be set independently. • Speakers can be connected to the 1/4" phone jacks and 5-way binding posts. CP2000-Owner's Manual