Yamaha CP33 Owner's Manual - Page 38

Reference Detailed Settings F5. Other Functions This section provides a variety of other settings and parameters, including those that affect pedal operation. AUX Pedal • Setting range: 1. Expression This setting allows control of dynamics during performance. 2. Soft Pedal The soft pedal reduces the volume and slightly changes the timbre of notes played while the pedal is pressed. The soft pedal will not affect notes that are already playing. 3. Sostenuto pedal If you play a note or chord on the keyboard and press the pedal while the note(s) are held, those notes will be sustained for as long as the pedal is held (as if the sustain pedal had been pressed) but all notes played thereafter will not be sustained. This makes it possible to sustain a chord, for example, while other notes are played "staccato." n Organ, string and choir voices will continue to sound for as long as the Sostenuto pedal is depressed. • Default setting: 1 (Expression) Soft Pedal Effect Depth • Setting range: 1 - 5 • Default setting: 3 This function sets the depth of the Soft pedal effect. Sustain Sample Depth • Setting range: 0 - 20 • Default setting: 12 The GRAND PIANO 1 (including the Variation), MONO PIANO (not including the Variation) Voice features special "Sustain Samples" that recreate the unique resonance of an acoustic grand piano's soundboard and strings when the Sustain pedal is pressed. This function lets you adjust the depth of this effect. Key-off Sample Volume • Setting range: 0 - 20 • Default setting: 10 You can adjust the volume of the key-off sound (the subtle sound produced when the keys are released) for the GRAND PIANO 1, MONO PIANO, HARPSICHORD, E.CLAVICHORD Voices. Sustain Pedal Type AUX Pedal Type • Setting range: 1, 2 • Default setting: 1 Depending upon the particular pedal that is connected to the SUSTAIN PEDAL jack or AUX PEDAL jack, the effect produced by operating the pedal (ON/OFF, dynamics, etc.) might be reversed. If this happens, you can use this setting to correct the pedal operation. The setting range is from 1 to 2. Press the [NO/-] and [YES/+] buttons simultaneously to recall the default setting of "1." n Make sure that the power is switched OFF when connecting or disconnecting the pedal. n If the Sustain Pedal type is set to "2", disconnecting the Sustain pedal while the power is switched on may leave the sustain active, causing notes to sustain indefinitely. In this case, switch the power off, then back on. 38 CP33 Owner's Manual