Yamaha CRW4260TX User Guide - Page 12
䌀栀愀瀀⸀匀礀猀琀攀洀 䌀漀渀昀椀最甀爀愀琀椀漀渀, Computer, Software
 |
View all Yamaha CRW4260TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Chapter 1 - System Configuration Chapter 1 - System Configuration In order to use the CRW4260tx, you will require the following. Computer The following operating environment is required: • An IBM/AT compatible computer with a 100 MHz or faster Pentium CPU (in order to write at 4x speed), or a 100 MHz or faster 486 CPU (in order to write at 2x speed) • A vacant slot in which to install a SCSI card or a pre-installed SCSI card • Windows 3.1, Windows 95, Windows NT4.0 or Higher • Sufficient hard disk space Note: You will need about twice as much space on your hard disk as that required by the data you wish to write to CD-ROM. SCSI card This is required in order to connect a SCSI device (the Yamaha CRW4260tx) to your computer. We recommend the following: Adaptec SCSI cards: AHA-2940 (PCI), AHA-284x (VL), AHA-2740 (EISA), AHA-154x (ISA), etc. Software Use writing software or packet writing software which supports the CRW4260tx. 4
-
1 -
2
-
3
-
4
-
5
-
6
-
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
